Root Crop Peeler МОК-150U

The peeler MOK-150U is designed for peeling potatoes and root crops (beets, carrots) at public catering and trade facilities. It is manufactured in a floor modification with stainless steel facing and in UHL4 (moderate climate) modification under GOST 15150-69 for operation at temperatures from +1 to +35°С.

MOK-150U root crop peeler is manufactured in accordance with the requirements of STB ISO 9001-2015 and have Declaration of conformity of products to the requirements of technical regulation, Certificate of Conformity to EU Directives - CE, Uniform Sanitary-Epidemiological and Hygienic Requirements and Eurasian Economic Union Conformity Certificate.
The equipment is included in the Eurasian Registry of Industrial Products of the Ministry for Industry and Trade of Russian Federation.
The equipment is included in the Eurasian Registry of Industrial Products of EAEU Member States (manufacturer’s identification No. 200166490).
The company is included in the Registry of bona fide partners of BelCCI.

Basic technical parameters of machine
Performance (kg/h, minimum) – 150
Peeling efficiency (%, minimum) - 90
Volume of simultaneously loaded product (potato) (kg, maximum) – 7
Percentage of potato waste during peeling (maximum) - 20
Nimber of discs (pcs.) - 2
Installed power (KW) – 0.37
Rated power consumption (KW) – 0.51
Power supply:
- current type - three-phase, alternating
- rated voltage (V) - 380
- current frequency (Hz) – 50
Overall dimensions (mm, maximum):
length - 580
width - 480
height - 800
Weight (kg, maximum) – 34
Cold water flow (l/kg, maximum) – 1.0
Total processing cycle duration (including filling and discharge) (min., maximum) – 2.0

Composition and functionality of root crop peeler
The machine consists of a housing with grid, feeding lid, motor and peel pulp collector.

1- Funnel, 2-Housing, 3- Grid, 4- Cup with bearings; 5- Lid with cuffs 2.2-30x52-1 G0ST8752-79; 6 - Abrasive disk; 7- Driving shaft, 8 - Screw with left-hand thread, 9 - Nipple coupling, 10 – Feeding funnel lid, 11 – Discharge door; 12 - Indicator; 13 – “START” button; 14 – “STOP” button, 15 – Time relay, 16 - Lever shutoff device, 17 - V-belt, 18 - motor with drive pulley, 19 - Base, 20 – Drain tube, 21 - Grounding boss; 22 – Peel pulp collector.

The peeled product is subjected to additional peeling (removal of “eyeholes” and the remaining peel) by hand.
The place of machine installation should ensure safety and ease of operation and maintenance. It should comply with sanitary standards, fire safety requirements, labor safety instructions and mounting guide.
The machine should be maintained clean and entirely assembled. It is allowed to use hair brushes or cloth for cleaning.

Warranty period is 24 months. It starts from the day of putting the machine into operation, but not later than 6 months from the date of machine purchase.