PLM-240 band saw for meat products is designed for fast cutting of chilled or frozen meat, bone-in meat or bones into portions of various size.
It is manufactured in УХЛ 4 (moderate and cold climate, adjustable environment) modification in accordance with GOST 15150-69.
The saw is notable for reliability, safety and compliance with Technical Regulations of the Customs Union, ease of maintenance and durability.
PLM-240 saw is manufactured in accordance with the requirements of the standard STB ISO 9001-2015 and has the Declaration of Conformity of the Eurasian Economic Union.
High-quality stainless steel housing is manufactured in floor-mounted modification on four adjustable supports providing machine installation on uneven surface.
Maximum cutting height is 300 mm, cutting width is 280 mm. The saw is equipped with a device for cutting the last portion of the product.
Saw table is equipped with additional movable folding table, where chilled meat can be cut.
Linear scale with 5-mm divisions is applied at the table for convenient cutting of pieces of the required thickness.
Basic technical specifications of the saw
Technical performance (kg/h, minimum)- 500
Installed power (KW) – 1,5
Power consumption (KW) – 1,91
Thickness, width and length of saw band (mm) - 0,6х20х2490
Cutting height (maximum, mm) - 300
- current type - three-phase, alternating
- rated voltage (V) - 380
- current frequency (Hz) – 50
Overall dimensions (mm, maximum):
length - 795
width - 730
height - 1750
Weight (kg, maximum) – 115
Saw composition and functionality
The saw is actuated by electric motor 21 where pulleys 9 are fixed. The pulleys drive band 20. The band is tensioned by rotating nut 11. The product is cut by passing it through band 20. Cutting width can be adjusted using limiter 7. For cutting chilled products, use a movable table 5. For cutting the last portion of the product, use the device for cutting the last portion of the product 6. For the convenience of saw operation, optimally set protective plate 8 by height (depending on product cutting height) and secure it with screw 10. Do not use the saw with no product pusher 3 when movable table is not used.
1 - Housing; 2 - Door; 3 - Pusher; 4 - Table; 5 - Movable table; 6 - Device for cutting the last portion of the product; 7 - Limiter; 8 - Protective plate; 9 - Pulleys; 10 - Protective plate screw; 11 - Nut; 12 - Support; 13 - Tray; 14 - Casing; 15 - Electric motor shield; 16 - Cover; 17 - Clamping cam; 18 – “Start-Stop” button; 19 - Protection device (automatic circuit breaker); 20 - Saw band; 21 - Electric motor; 22 - Saw band flying-off preventer; 23 - Brushes
Warranty period is 24 months. It starts from the day of putting the machine into operation, but not later than 6 months from the date of machine purchase.